Airsense 10 Autoset, ResMed Pack

Airsense 10 Autoset, autocpap by Resmed

The Airsense 10 Autoset is a top quality and comfortable positive airway pressure air generator for the treatment of obstructive sleep apnoea syndrome (OSA) in adult patients.

The Resmed autocpap device adapts to the needs of the patient to provide a response to the apnoea produced.

It has a modern, practical and functional design that allows a very intuitive use thanks to its colour touch screen.

Functionalities of the Airsense 10 Autoset

AutoRamp. The AutoRamp function with sleep onset detection makes it very comfortable to use and helps the patient’s adaptability to CPAP therapy. It is used for a gradual onset of treatment. It can be set between 5 and 45 minutes to best suit the patient’s needs.

Start and GO. The AIRSENSE 10 has been designed to make therapy easier. With no settings or complicated menus to navigate, simply press Start and you are ready to go.

SmartStart. Therapy begins as soon as you start breathing with your mask. When you remove the mask, it stops automatically. Airsense 10 is compatible with all ventilated masks and with 15mm and 22mm inner diameter tubing.

Data transmission. The Airsense 10 device offers the advantage of transmitting captured sleep apnoea data. For data transmission it is necessary that you are connected to the wireless network and that you have opted for this option. With this function you can also change the treatment settings of your health care assistant.

SD memory card. By storing on an SD memory stick, you can send your sleep apnoea treatment information to your healthcare assistant.

Travel. Whether you travel by plane or other means of transport, you can carry your Airsense 10 device in a dedicated carrying bag to avoid damage. In terms of regulations for transporting it on an aircraft, it complies with Federal Aviation Administration (FAA) regulations.

Airsense S10 CPAP compatible humidifier

The Airsense Autosep S10 model can be connected to the ResMed HumidAir™ humidifier to achieve an improvement in your sleep quality if required.

Another option is the ClimateLine heated tube. This way you can additionally have higher humidity of the breathing air and oxygen tempering.

What is included in the purchase of an Airsense 10 device?

1 Resmed Airsense 10 Autoset device, Autoset model

1 Power supply (cable)

1 Standard particulate air filter

1 Carrying bag specifically for this model

1 SD card

1 SlimLine tube and elbow

1 User manual

• Operating pressure from 4 to 20 cm H2O
• Dimensions in height, width and length: 116 mm x 255 mm x 150 mm
• Noise level of 27 dBA with a 2 dBA uncertainty.
• Power supply is 90 W, with a typical power consumption of 57 W and a maximum of 104 W.
• Operating temperature is +5º to +35º and humidity is 10% to 95% relative humidity without condensation.

Airsense 10 Autoset Pack Premium User Manual

Advice/maintenance

You should clean the device weekly according to the instructions described in the equipment manual.

Wash the humidifier and air tubing in warm water and a mild detergent, rinse well and allow to air dry, away from direct sunlight and/or heat;

Clean the outside of the device with a dry cloth;

Additional information

Shipping Terms and Conditions:

• Shipping within  48 hours: 9.80€
• Cash on delivery (24 hours): 18.15€
• FREE shipping on purchases over 30€

 Payments:

• Debit/credit card
• Bank transfer (send proof for faster delivery)
• Paypal